Contact Person
Share on:
MK-SF301 PU soft foam release agent

MK-SF301 PU soft foam release agent

Product & Service Description

 

Mould Release Agent for Polyurethane(PU) Soft Foam MK-SF301

FEATURES
* Excellent release.
* Non-silicone.
* Contains no chlorinated or CFC solvents.
* Low wax build-up.

PRODUCT SPECIFICATIONS
Appearance Hazy liquid
Solids 8-10%
Temperature 45-70 °C

Application Spray & brush
Diluents
Solvent gasoline, methane, petroleum ethers,etc
Viscosity Medium

CAUTION
At temperatures above 500°F, fumes are evolved which, if inhaled, can cause flu like systems. Use with adequate ventilation.

Application
1. clean mold surface prior to preparing the molding surface.
2. Heat the mold to operating temperature.
3. Apply a coat of MK-55 with a spray or brush, and allow to dry..
4. Rub MK-55 into mold surface with clean Cotton cloth.
5. Repeat two or three times to seal the mold surface.
6. Start molding and reapply a light coat of MK-55 after each molding cycle.

Packing
Stored at the temperature of 20 to 30 degrees,Valid date:18months.
Sakurai Release is packaged in 20&205 kg.

CAUTION
1.Use Adequate protection when handling any release solvent system.
2.Skin contact may cause dryness.
3.Wear safety glasses or their equivalent to prevent eye injury.

See also other products & services
MK-CE311 PU elastomeric release agent.
MK-CE311 PU elastomeric release agent.
MK-TD1 Aluminum alloy release agent
MK-TD1 Aluminum alloy release agent
MK-TF Magnesium alloy release agent
MK-TF Magnesium alloy release agent
MK-TH Zinc Alloy release agent
MK-TH Zinc Alloy release agent
MK-PU-111 Release agent  for PU hight gloss shoe sole
MK-PU-111 Release agent for PU hight gl...
MK-100E EVA release agent
MK-100E EVA release agent
MK-WB-308 Release agent for PU matt shoe sole.
MK-WB-308 Release agent for PU matt shoe...
MK-WB-309 Water base release agent for PU shoe sole.
MK-WB-309 Water base release agent for P...
MK-SF301 PU soft foam release agent
MK-SF301 PU soft foam release agent
MK-RG302 PU rigid foam release agent.
MK-RG302 PU rigid foam release agent.
MK-TG Zinc alloy release agent
MK-TG Zinc alloy release agent