Solvent Based Mold Release Agent for PU High Gloss Shoe Soles MK-PU-111           

Summary

Sakurai MK-PU-111 PU Shine soles release agent,efficient use of polymer chemicals added compounded lubricants and polishes, product environmental health, has excellent release force and release agent, so that they have unique low surface tension, sprayed on the mold has good adhesion, andIt does not affect the spray and bonding. Widely used in polyurethane, polyether, single-density requirements and other shiny PU soles.

Data sheet

 
Feature
1.Environmental health harmless to human body does not produce bad smell
2.Excellent release properties and release times
3.Protect the mold not carbon deposition, release more than 10,000 times without white。
4.The release number can exceed more than ten thousand times without cleaning the mold.。
5.Product surface is easy to clean, does not affect spraying。

Usage
1.Mold temperature higher than 30 degrees before use
2.The liquid is diluted with alkanes, is sprayed onto the mold after dilution.
3.Recommend the use of small-caliber gun, air pressure is greater than 0.3Mpa
4.Adjust spray gun, the discharged liquid mist
5.Spray once every 1-5 months of continuous off-molded product

Attention
1.The product is sealed stored at room temperature requirements among 0 ℃ - 40 ℃
2.In the case of sealed storage,the production date shelf life of 12 months,beyond the shelf life of products by the application of the test to achieve the standard can continue to use.

Package

20 kgs/barrel